*2-way Sliding Exchanger
This work exchanger provides a simultaneously in-and-out working space to limit the idle time, which in turn reaches the utmost output value
*Route Duplication
The user only needs to set two referent points to duplicate a same route in saving programming time
*Routing Bit Sectioning
The user may set a designated distance, and have the routing bit shift-up or -down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.
*Friendly GUI
Windows XP system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.
- Two-slide PCB Separator
- Low Stress
- Sharp cutting edge
- Manual loading / unloading
- High speed cutting by 4 axes control
- Easy teaching with image processing
| Setting fixture | 2 stations |
| Working Area | X:370mm Y:330mm Z:15mm X:330mm Y:330mm (Universal Jig) |
| Component Height | Top side: 15mm Bottom side: 45mm |
| PCB Thickness | 0.5 ~ 2mm (It's necessary to contact Aurotek in advance for over 2mm ) |
| Precision of Cutting | ± 0.1mm |
| Positioning Accuracy | ± 0.01mm |
| Positioning Repeatability | ± 0.02mm |
| Number of axes in use | 4 (X,Y1,Y2,Z) |
| Driving Speed (Max.) | X, Y: 1000mm/sec, Z: 750mm/sec |
| Cutting Speed (Max.) | X, Y, Z: 100mm/sec (It's according to the specification of Bit for the best speed setting) |
| Spindle | High speed variable frequency motor, 150W(Max. 58,000 rpm) |
| Cutting possibilities | Linear, Arc, Circular, U-curve, L-curve |
| Motor of Axes | 4 axes (200W AC Servo motors) |
| Routing bit sectioning | Max. 2 sections |
| Route planning | Direct coordinate input or manual Guiding with 10 x CCD camera |
| Safety area sensor | Standard |
| Tool break detection | Standard |
| Operating System | Windows XP |
| Program storage | HDD |
| Program backup | USB |
| Man-machine interface | TFT monitor + keyboard + mouse |
| PCB loading/unloading | Manual |
| Power Supply | 3-Phase AC220V±5℅ 50/60Hz [3HP Vacuum included]3kw,11A |
| Air | Dry Air 0.5Mpa |
| Dimensions | 1190x1039x1401+535 mm (signal tower) |
| Weight | 390kg |
| Working hight | 90cm±5cm |
